| Alco 750 Drawworks Specifications |
|
| Maximum Input Horse Power |
750 HP/559kW |
| Recommended Wireline Size |
1-1/8" |
| Max Single Line Pull Cap. |
65,000lbs-28,900 daN |
| Max Hook Load w\6 lines strung |
340,860lbs-151620daN |
| Max Hook Load w\8 lines strung |
437,840lbs-194760daN |
| Max Hook Load w\10 lines strung |
527,150lbs-234490daN |
| Max Drum |
|
| -DiaxWidth(Without grooving) |
18"x39" |
| -Brake Rim Dia x Width |
42"x8" |
| -Brake Contact Area |
1670 in² |
| -Brake Cooling Type |
Water and Glycol |
| -Brake Blocks |
8"x12"x1-1/8" |
| -Clutch |
PO324 |
| -Chain |
1-3/4" |
| |
|
| |
|
| - |
- |
| Standard Equipment |
|
| -Right Angle Drive Gear Box |
|
| -Central Greasing System |
|
| Optional Equipment |
|
| Auxiliary Brake |
Eaton 134WCBD/236WCBD |
| Air Supply Required |
100-130psi(Max 150 psi) |
| Dimensions/Miscellaneous |
|
| -Length |
118" |
| -Width |
115" |
| -Height |
55" |
| -Weight |
23,000lbs including gearbox |
|
|
|
| Alco 450 Drawworks Specifications |
|
| Maximum Input Horse Power |
450 HP/335kW |
| Recommended Wireline Size |
1" |
| Max Single Line Pull Cap.(see note) |
40,000lbs-17.800 daN |
| Max Hook Load w\6 lines strung |
208,000lbs-95,500 daN |
| |
|
| |
|
| Max Drum |
|
| -DiaxWidth(Without grooving) |
|
| -Brake Rim Dia x Width |
42"x10" |
| -Brake Contact Area |
|
| -Brake Cooling Type |
|
| -Capacity 9/16" line |
|
| -Brake Blocks |
| 10"x12"x1-1/8" |
8"x12"x1-1/8" |
|
| -Clutch |
|
| -Chain |
| 1-1/2" Double |
1-1/4" Triple |
|
| Standard Equipment |
|
| -Right Angle Drive Gear Box |
|
| -Central Greasing System |
|
| Optional Equipment |
|
| Auxiliary Brake |
Eaton 134WCBD/236WCBD |
| Air Supply Required |
100-130psi(Max 150 psi) |
| Dimensions/Miscellaneous |
|
| -Length |
118" |
| -Width |
115" |
| -Height |
55" |
| -Weight |
15,000lbs including gearbox |
| Note-Single line capacity is calculated based on a power input of 450HP and the use of a transmission whose lowest gear is 4:00 : 1 |
|
|
